Horn Metric MRE2-RBE Models

Multi-Stack All-Electric CNC Tube Benders with Rear Boost

The Horn Metric MRE2-RBE models are an All-Electric multi-stack CNC Tube Bender with the additional capability of rear boost to aid in producing tight radius bends. The carriage boost system provides the ability to mandrel bend tight radius tubes or push roll large radius sweeps on the top stack.
This value priced all-electric machine features automatic and precise positioning of the tooling for fast setups and reduced scrap. Most brands and types of existing tooling can be used on this machine.

65MRE2-RBE-191028

General Info: MRE2-RBE All-Electric CNC Tube Bender

  • Fully All-Electric CNC Tube bender
  • No hydraulics or pneumatic assisted tooling
  • Automatic setup, no wrenches needed to adjust tool pressure
  • BendPro CNC controls with full simulation capability
  • True multi-stack & multi-radius capability with up/down PD
  • Value priced – a lot of machine for the money
  • Bend-arm (C-axis) by servo motor via planetary transmission
  • Carriage (Y-Axis) by servo motor with boosting power
  • Clamp, Pressure die, & Pressure die assist are servo driven
  • Mandrel is servo driven with early withdrawal
  • Collet (B-Axis) rotation by servo motor
  • Tooling shift motion by servo motor
  • Automatic mandrel lubrication
  • Automatic tube support
  • Environmentally friendly: no hydraulics, low noise & heat
  • Bending direction is right-hand, with left-hand available at no extra cost

Special Features:

  • Programmable Multi-Stack height and true Multi-Radius
  • Carriage Boost for tight radius
  • Roll bending available for large radius
  • Full electric machine with automatic setup

Horn Metric MRE2-RBE – Available Model Specs

Horn Metric 50MRE2-RBE

Specifications UNIT IN METRIC
Bending Capacity / Round Tube / Mild Steel IN/MM 2.00 X 0.079 50.8 X 2.0
Bending Capacity / Round Tube / Non-Ferrous IN/MM 2.00 X 0.138 50.8 X 3.5
Bending Capacity / Round Tube / Stainless IN/MM 2.00 X 0.055 50.8 X 1.4
Bending Capacity / Solid Bar / Mild Steel IN/MM 1.575 X 0.079 40 X 2.0
Bending Capacity / Solid Bar / Mild Steel IN/MM 0.984 25

Horn Metric 65MRE2-RBE

Specifications UNIT IN METRIC
Bending Capacity / Round Tube / Mild Steel IN/MM 2.55 X 0.098 65 X 2.5
Bending Capacity / Round Tube / Non-Ferrous IN/MM 2.55 X 0.177 65 X 4.5
Bending Capacity / Round Tube / Stainless IN/MM 2.55 X 0.065 65 X 1.65
Bending Capacity / Solid Bar / Mild Steel IN/MM 2.00 X 0.090 50 X 2.3
Bending Capacity / Solid Bar / Mild Steel IN/MM 1.300 33

Horn Metric 80MRE2-RBE

Specifications UNIT IN METRIC
Bending Capacity / Round Tube / Mild Steel IN/MM 3.15 X 0.098 80 X 2.5
Bending Capacity / Round Tube / Non-Ferrous IN/MM 3.15 X 0.177 80 X 4.5
Bending Capacity / Round Tube / Stainless IN/MM 2.75 X 0.065 70 X 1.6
Bending Capacity / Solid Bar / Mild Steel IN/MM 2.00 X 0.079 50 X 2.0
Bending Capacity / Solid Bar / Mild Steel IN/MM 1.378 35

Horn Metric 100MRE2-RBE

Specifications UNIT IN METRIC
Bending Capacity / Round Tube / Mild Steel IN/MM 4.00 X 0.140 100 X 3.6
Bending Capacity / Round Tube / Non-Ferrous IN/MM 4.00 X 0.255 100 X 6.5
Bending Capacity / Round Tube / Stainless IN/MM 3.50 X 0.065 89 X 1.6
Bending Capacity / Solid Bar / Mild Steel IN/MM 2.75 X 0.138 70 X 3.5
Bending Capacity / Solid Bar / Mild Steel IN/MM 1.75 45
BPLogo-wScreen-220418

BendPro G2v3 Features & Benefits:

  • Most popular CNC bender Control In North America
  • Easy to operate and program
  • Extremely compact
  • 3D simulation
  • Teach Mode with anti­-interference moves
  • Online troubleshooting