HMT provides bender models that are considered to be “in between” sizes. The HMT 2.5ECNC-MS bender is definitely an in between size, but fills a niche when a 3″ machine is either too expensive or more speed is required. The bend head gets smaller and the servo motors and gearing are sized to the loads. This bender is designed to bend 2.5″ OD stainless steel on a 2.5″ CLR, and run at high speeds for 24/7. The end result is a fast machine that is built to last with plenty of service factor.
|Non-ferrous tubing (Yield to 25,000 PSI)||IN/MM||2.500 X 0.375||63.5 X 9.5|
|Steel tubing (Yield to 40,000 PSI)||IN/MM||2.500 X 0.188||63.5 X 4.7|
|Stainless steel tubing (Yield to 60,000 PSI)||IN/MM||2.500 X 0.095||63.5 X 2.4|
|Square steel tubing (Yield to 40,000 PSI)||IN/MM||1.750 X 0.250||44.5 X 6.3|
|Steel pipe||IPS||1-1/2 IPS Sch 80|
|Solid steel bar||IN/MM||1.250||31.7|