Horn Metric TSR Models
Single-Stack Hydraulic CNC Tube Benders
The Horn Metric TSR models are a conventional 3-axis hydraulic drive CNC bender for single-stack mandrel bending. This model can be equipped with carriage boost on 80mm models and above, for tight radius bending. The machine’s rugged design allows it to bend typical applications.
![150TSR-L-220411](https://hornmachinetools.com/wp-content/uploads/2022/05/150TSR-L-220411.png)
General Info: TSR Hydraulic CNC Tube Bender
- Hydraulic CNC Tube Bender
- Simple design with solid engineering
- BendPro CNC controls with full simulation capability
- Single-Stack tooling mounting
- Bend-arm (C-axis) by hydraulic drive with cylinder and multi-strand chain
- Carriage (Y-Axis) by servo motor with high speed moves
- Clamp, Pressure die, & Pressure die assist are hydraulic driven
- Mandrel is hydraulic driven with early withdrawal
- Collet (B-Axis) rotation by servo motor
- Automatic mandrel lubrication
- Automatic tube support
- Selectable 240V or 480V 3-phase power
- Tooling supported by U.S. tool makers
- Environmentally friendly: Small power consumption, low noise & heat
Special Features:
- Designed to replace EL or Pines benders with tooling interchangeability
- Carriage Boost is optional on 80mm and above
- Most popular entry level machine choice for general purpose bending
Horn Metric TSR – Available Model Specs
Horn Metric 38TSR
Specifications | UNIT | US | METRIC |
---|---|---|---|
Bending Capacity / Round Tube / Mild Steel | IN/MM | 1.50 X 0.118 | 38.1 X 3.0 |
Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 1.50 X 0.236 | 38.1 X 6.0 |
Bending Capacity / Round Tube / Stainless | IN/MM | 1.50 X 0.071 | 38.1 X 1.8 |
Bending Capacity / Square Tube / Mild Steel | IN/MM | 1.18 X 0.118 | 30 X 3.0 |
Bending Capacity / Solid Bar / Mild Steel | IN/MM | 0.787 | 20 |
Horn Metric 50TSR
Specifications | UNIT | US | METRIC |
---|---|---|---|
Bending Capacity / Round Tube / Mild Steel | IN/MM | 2.00 X 0.118 | 50.8 X 3.0 |
Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 2.00 X 0.196 | 50.8 X 5.0 |
Bending Capacity / Round Tube / Stainless | IN/MM | 2.00 X 0.071 | 50.8 X 1.8 |
Bending Capacity / Square Tube / Mild Steel | IN/MM | 1.575 X 0.118 | 40 X 3.0 |
Bending Capacity / Solid Bar / Mild Steel | IN/MM | 0.984 | 25 |
Horn Metric 65TSR
Specifications | UNIT | US | METRIC |
---|---|---|---|
Bending Capacity / Round Tube / Mild Steel | IN/MM | 2.50 X 0.118 | 65 X 3.0 |
Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 2.50 X 0.196 | 65 X 5.0 |
Bending Capacity / Round Tube / Stainless | IN/MM | 2.50 X 0.071 | 65 X 1.8 |
Bending Capacity / Square Tube / Mild Steel | IN/MM | 1.96 X 0.118 | 50 X 3.0 |
Bending Capacity / Solid Bar / Mild Steel | IN/MM | 1.18 | 30 |
Horn Metric 80TSR
Specifications | UNIT | US | METRIC |
---|---|---|---|
Bending Capacity / Round Tube / Mild Steel | IN/MM | 3.15 X 0.177 | 80 X 4.5 |
Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 3.15 X 0.354 | 80 X 9.0 |
Bending Capacity / Round Tube / Stainless | IN/MM | 3.15 X 0.126 | 80 X 3.2 |
Bending Capacity / Square Tube / Mild Steel | IN/MM | 2.36 X 0.177 | 60 X 4.5 |
Bending Capacity / Solid Bar / Mild Steel | IN/MM | 1.378 | 35 |
Horn Metric 100TSR
Specifications | UNIT | US | METRIC |
---|---|---|---|
Bending Capacity / Round Tube / Mild Steel | IN/MM | 4.00 X 0.216 | 101.6 X 5.5 |
Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 4.00 X 0.393 | 101.6 X 10 |
Bending Capacity / Round Tube / Stainless | IN/MM | 4.00 X 0.118 | 101.6 X 3.0 |
Bending Capacity / Square Tube / Mild Steel | IN/MM | 2.75 X 0.216 | 70 X 5.5 |
Bending Capacity / Solid Bar / Mild Steel | IN/MM | 1.96 | 50 |
Horn Metric 120TSR
Specifications | UNIT | US | METRIC |
---|---|---|---|
Bending Capacity / Round Tube / Mild Steel | IN/MM | 4.72 X 0.216 | 120 X 5.5 |
Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 4.72 X 0.393 | 120 X 10 |
Bending Capacity / Round Tube / Stainless | IN/MM | 4.72 X 0.118 | 120 X 3.0 |
Bending Capacity / Square Tube / Mild Steel | IN/MM | 3.54 X 0.236 | 90 X 6.0 |
Bending Capacity / Solid Bar / Mild Steel | IN/MM | 2.36 | 60 |
Horn Metric 150TSR
Specifications | UNIT | US | METRIC |
---|---|---|---|
Bending Capacity / Round Tube / Mild Steel | IN/MM | 6.00 X 0.275 | 152.4 X 7.0 |
Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 6.00 X 0.512 | 152.4 X 13.0 |
Bending Capacity / Round Tube / Stainless | IN/MM | 6.00 X 0.157 | 152.4 X 4.0 |
Bending Capacity / Square Tube / Mild Steel | IN/MM | 3.50 X 0.275 | 70 X 7.0 |
Bending Capacity / Solid Bar / Mild Steel | IN/MM | 2.750 | 70 |
Horn Metric 220TSR
Specifications | UNIT | US | METRIC |
---|---|---|---|
Bending Capacity / Round Tube / Mild Steel | IN/MM | 8.66 X 0.472 | 220 X 12.0 |
Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 8.66 X 0.314 | 220 X 8.0 |
Min/Max Bending Radius | IN/MM | 4.720 / 39.370 | 120 / 1000 |
Standard Length Over Mandrel | IN/MM | 236.22 | 6000 |
Max Bending Angle | IN/MM | 190° | 190° |
![BPLogo-wScreen-220418](https://hornmachinetools.com/wp-content/uploads/2022/04/BPLogo-wScreen-220418.png)
BendPro G2v3 Features & Benefits:
- Most popular CNC bender Control In North America
- Easy to operate and program
- Extremely compact
- 3D simulation
- Teach Mode with anti-interference moves
- Online troubleshooting