Horn Metric TDRE Models
Dual-Stack Hybrid CNC Tube Benders
The Horn Metric TDRE models are hybrid CNC tube benders with servo electric bending and tube positioning, with hydraulic tooling actuation. This model has the ability to mandrel bend tight radius bends with an optional carriage boost function (RBE). This hybrid machine is a value priced solution for many applications with outstanding capability, reliability, and performance.
Most popular machine for automotive and many other applications that do not require roll forming.
General Info: TDRE Hybrid CNC Tube Bender
- Electric/Hydraulic Hybrid CNC Tube Bender
- Electric drive bending with hydraulic tooling actuation
- BendPro CNC controls with full simulation capability
- Dual-Stack tooling mounting for Draw bending applications only
- Value priced – a lot of machine for the money
- Bend-arm (C-axis) by servo motor via planetary transmission
- Carriage (Y-Axis) by servo motor with optional carriage boost (RBE)
- Clamp, Pressure die, & Pressure die assist are hydraulic driven
- Mandrel is hydraulic driven with early withdrawal
- Collet (B-Axis) rotation by servo motor
- Tooling shift: up/down by hydraulic & left/right by servo motor
- Automatic mandrel lubrication
- Automatic tube support
- Environmentally friendly: Small power consumption, low noise & heat
Special Features:
- Dual stack tooling fixed height
- Carriage Boost is optional on 50mm and above
- Mandrel bending tight radius (No roll forming)
Horn Metric TDRE – Available Model Specs
Horn Metric 18TDRE
| Specifications | UNIT | US | METRIC |
|---|---|---|---|
| Bending Capacity / Round Tube / Mild Steel | IN/MM | 0.700 X 0.062 | 18 X 1.6 |
| Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 0.700 X 0.079 | 18 X 2.0 |
| Bending Capacity / Round Tube / Stainless | IN/MM | 0.700 X 0.031 | 18 X 0.8 |
| Bending Capacity / Square Tube / Mild Steel | IN/MM | 0.500 X 0.047 | 15 X 1.2 |
| Bending Capacity / Solid Bar / Mild Steel | IN/MM | 0.315 | 8 |
Horn Metric 30TDRE
| Specifications | UNIT | US | METRIC |
|---|---|---|---|
| Bending Capacity / Round Tube / Mild Steel | IN/MM | 1.18 X 0.079 | 30 X 2.0 |
| Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 1.18 X 0.138 | 30X 3.5 |
| Bending Capacity / Round Tube / Stainless | IN/MM | 1.12 X 0.051 | 28.6 X 1.3 |
| Bending Capacity / Square Tube / Mild Steel | IN/MM | 1.00 X 0.079 | 25.4 X 2.0 |
| Bending Capacity / Solid Bar / Mild Steel | IN/MM | 0.472 | 12 |
Horn Metric 32TDRE
| Specifications | UNIT | US | METRIC |
|---|---|---|---|
| Bending Capacity / Round Tube / Mild Steel | IN/MM | 1.25 X 0.070 | 32 X 1.8 |
| Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 1.25 X 0.118 | 32 X 3.0 |
| Bending Capacity / Round Tube / Stainless | IN/MM | 1.25 X 0.047 | 32 X 1.2 |
| Bending Capacity / Square Tube / Mild Steel | IN/MM | 1.00 X 0.070 | 25.4 X 1.8 |
| Bending Capacity / Solid Bar / Mild Steel | IN/MM | 0.4 | 12 |
Horn Metric 38TDRE
| Specifications | UNIT | US | METRIC |
|---|---|---|---|
| Bending Capacity / Round Tube / Mild Steel | IN/MM | 1.50 X 0.071 | 38.1 X 1.8 |
| Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 1.50 X 0.118 | 38.1 X 3.0 |
| Bending Capacity / Round Tube / Stainless | IN/MM | 1.50 X 0.047 | 38.1 X 1.2 |
| Bending Capacity / Square Tube / Mild Steel | IN/MM | 1.125 X 0.071 | 30 X 1.8 |
| Bending Capacity / Pipe / Mild Steel | IN/MM | 3/4 IPS Sch 80 |
Horn Metric 50TDRE
| Specifications | UNIT | US | METRIC |
|---|---|---|---|
| Bending Capacity / Round Tube / Mild Steel | IN/MM | 2.00 X 0.079 | 50.8 X 2.0 |
| Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 2.00 X 0.137 | 50.8 X 3.5 |
| Bending Capacity / Round Tube / Stainless | IN/MM | 2.00 X 0.051 | 50.8 X 1.3 |
| Bending Capacity / Square Tube / Mild Steel | IN/MM | 1.57 X 0.079 | 40 X 2.0 |
| Bending Capacity / Pipe / Mild Steel | IN/MM | 1.25 IPS Sch 40 |
Horn Metric 65TDRE
| Specifications | UNIT | US | METRIC |
|---|---|---|---|
| Bending Capacity / Round Tube / Mild Steel | IN/MM | 2.50 X 0.080 | 65 X 2.0 |
| Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 2.50 X 0.140 | 65 X 3.5 |
| Bending Capacity / Round Tube / Stainless | IN/MM | 2.50 X 0.060 | 65 X 1.4 |
| Bending Capacity / Square Tube / Mild Steel | IN/MM | 1.97 X 0.080 | 50 X 2.0 |
| Bending Capacity / Pipe / Mild Steel | IN/MM | 1.50 IPS Sch 40 |
Horn Metric 80TDRE
| Specifications | UNIT | US | METRIC |
|---|---|---|---|
| Bending Capacity / Round Tube / Mild Steel | IN/MM | 3.15 X 0.098 | 80 X 2.5 |
| Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 3.15 X 0.177 | 80 X 4.5 |
| Bending Capacity / Round Tube / Stainless | IN/MM | 3.15 X 0.062 | 80 X 1.6 |
| Bending Capacity / Square Tube / Mild Steel | IN/MM | 2.36 X 0.098 | 60 X 2.5 |
| Bending Capacity / Pipe / Mild Steel | IN/MM | 2.00 IPS Sch 40 |
Horn Metric 100TDRE
| Specifications | UNIT | US | METRIC |
|---|---|---|---|
| Bending Capacity / Round Tube / Mild Steel | IN/MM | 4.00 X 0.216 | 101.6 X 5.5 |
| Bending Capacity / Round Tube / Non-Ferrous | IN/MM | 4.00 X 0.393 | 101.6 X 10 |
| Bending Capacity / Round Tube / Stainless | IN/MM | 4.00 X 0.118 | 101.6 X 3.0 |
| Bending Capacity / Square Tube / Mild Steel | IN/MM | 2.75 X 0.216 | 70 X 5.5 |
| Bending Capacity / Pipe / Mild Steel | IN/MM | 3.00 IPS Sch 40 |
BendPro G2v3 Features & Benefits:
- Most popular CNC bender Control In North America
- Easy to operate and program
- Extremely compact
- 3D simulation
- Teach Mode with anti-interference moves
- Online troubleshooting