Horn Metric MRE Models

Multi-Stack Hybrid CNC Tube Benders

The Horn Metric MRE models are a multi-stack hybrid CNC Tube Bender with servo controlled X & Z axis movement capabilities. The optional carriage boost system provides the ability to mandrel bend tight radius tubes or push roll large radius sweeps on the top stack.
This value priced all-electric machine features automatic and precise positioning of the tooling for fast setups and reduced scrap. Most brands and types of existing tooling can be used on this machine.

50MRE-210203

General Info: MRE Hybrid CNC Tube Bender

  • Electric/Hydraulic Hybrid CNC Tube Bender
  • Electric drive bending with hydraulic tooling actuation
  • BendPro CNC controls with full simulation capability
  • Multi-stack capability with Servo driven up, down, & side bend head movement
  • Value priced – a lot of machine for the money
  • Bend-arm (C-axis) by servo motor via planetary transmission
  • Carriage (Y-Axis) by servo motor with power to push roll
  • Clamp, Pressure die, & Pressure die assist are hydraulic driven
  • Mandrel is hydraulic driven with early withdrawal
  • Collet (B-Axis) rotation by servo motor
  • Automatic mandrel lubrication
  • Automatic tube support
  • Environmentally friendly: Small power consumption, low noise & heat

Special Features:

  • Programmable Multi-Stack height and Radius
  • Roll bending available for large radius
  • Carriage Boost available on RBE models only

Horn Metric MRE – Available Model Specs

Horn Metric 38MRE

Specifications UNIT IN METRIC
Bending Capacity / Round Tube / Mild Steel IN/MM 1.50 X 0.071 38.1 X 1.8
Bending Capacity / Round Tube / Non-Ferrous IN/MM 1.50 X 0.118 38.1 X 3.0
Bending Capacity / Round Tube / Stainless IN/MM 1.50 X 0.047 38.1 X 1.2
Bending Capacity / Square Tube / Mild Steel IN/MM 1.18 X 0.071 30 X 1.8
Bending Capacity / Solid Bar / Mild Steel IN/MM 0.787 20

Horn Metric 50MRE

Specifications UNIT IN METRIC
Bending Capacity / Round Tube / Mild Steel IN/MM 2.00 X 0.079 50.8 X 2.0
Bending Capacity / Round Tube / Non-Ferrous IN/MM 2.00 X 0.138 50.8 X 3.5
Bending Capacity / Round Tube / Stainless IN/MM 2.00 X 0.055 50.8 X 1.4
Bending Capacity / Square Tube / Mild Steel IN/MM 1.575 X 0.079 40 X 2.0
Bending Capacity / Solid Bar / Mild Steel IN/MM 0.984 25

Horn Metric 65MRE

Specifications UNIT IN METRIC
Bending Capacity / Round Tube / Mild Steel IN/MM 2.50 X 0.079 65 X 2.0
Bending Capacity / Round Tube / Non-Ferrous IN/MM 2.50 X 0.138 65 X 3.5
Bending Capacity / Round Tube / Stainless IN/MM 2.50 X 0.055 65 X 1.4
Bending Capacity / Square Tube / Mild Steel IN/MM 1.96 X 0.079 50 X 2.0
Bending Capacity / Solid Bar / Mild Steel IN/MM 1.18 30
BPLogo-wScreen-220418

BendPro G2v3 Features & Benefits:

  • Most popular CNC bender Control In North America
  • Easy to operate and program
  • Extremely compact
  • 3D simulation
  • Teach Mode with anti­-interference moves
  • Online troubleshooting