Horn Metric TSR Models

Single-Stack Hydraulic CNC Tube Benders

The Horn Metric TSR models are a conventional 3-axis hydraulic drive CNC bender for single-stack mandrel bending. This model can be equipped with carriage boost on 80mm models and above, for tight radius bending. The machine’s rugged design allows it to bend typical applications.

150TSR-L-220411

General Info: TSR Hydraulic CNC Tube Bender

  • Hydraulic CNC Tube Bender
  • Simple design with solid engineering
  • BendPro CNC controls with full simulation capability
  • Single-Stack tooling mounting
  • Bend-arm (C-axis) by hydraulic drive with cylinder and multi-strand chain
  • Carriage (Y-Axis) by servo motor with high speed moves
  • Clamp, Pressure die, & Pressure die assist are hydraulic driven
  • Mandrel is hydraulic driven with early withdrawal
  • Collet (B-Axis) rotation by servo motor
  • Automatic mandrel lubrication
  • Automatic tube support
  • Selectable 240V or 480V 3-phase power
  • Tooling supported by U.S. tool makers
  • Environmentally friendly: Small power consumption, low noise & heat

Special Features:

  • Designed to replace EL or Pines benders with tooling interchangeability
  • Carriage Boost is optional on 80mm and above
  • Most popular entry level machine choice for general purpose bending

Horn Metric TSR – Available Model Specs

Horn Metric 38TSR

Specifications UNIT US METRIC
Bending Capacity / Round Tube / Mild Steel IN/MM 1.50 X 0.118 38.1 X 3.0
Bending Capacity / Round Tube / Non-Ferrous IN/MM 1.50 X 0.236 38.1 X 6.0
Bending Capacity / Round Tube / Stainless IN/MM 1.50 X 0.071 38.1 X 1.8
Bending Capacity / Square Tube / Mild Steel IN/MM 1.18 X 0.118 30 X 3.0
Bending Capacity / Solid Bar / Mild Steel IN/MM 0.787 20

Horn Metric 50TSR

Specifications UNIT US METRIC
Bending Capacity / Round Tube / Mild Steel IN/MM 2.00 X 0.118 50.8 X 3.0
Bending Capacity / Round Tube / Non-Ferrous IN/MM 2.00 X 0.196 50.8 X 5.0
Bending Capacity / Round Tube / Stainless IN/MM 2.00 X 0.071 50.8 X 1.8
Bending Capacity / Square Tube / Mild Steel IN/MM 1.575 X 0.118 40 X 3.0
Bending Capacity / Solid Bar / Mild Steel IN/MM 0.984 25

Horn Metric 65TSR

Specifications UNIT US METRIC
Bending Capacity / Round Tube / Mild Steel IN/MM 2.50 X 0.118 65 X 3.0
Bending Capacity / Round Tube / Non-Ferrous IN/MM 2.50 X 0.196 65 X 5.0
Bending Capacity / Round Tube / Stainless IN/MM 2.50 X 0.071 65 X 1.8
Bending Capacity / Square Tube / Mild Steel IN/MM 1.96 X 0.118 50 X 3.0
Bending Capacity / Solid Bar / Mild Steel IN/MM 1.18 30

Horn Metric 80TSR

Specifications UNIT US METRIC
Bending Capacity / Round Tube / Mild Steel IN/MM 3.15 X 0.177 80 X 4.5
Bending Capacity / Round Tube / Non-Ferrous IN/MM 3.15 X 0.354 80 X 9.0
Bending Capacity / Round Tube / Stainless IN/MM 3.15 X 0.126 80 X 3.2
Bending Capacity / Square Tube / Mild Steel IN/MM 2.36 X 0.177 60 X 4.5
Bending Capacity / Solid Bar / Mild Steel IN/MM 1.378 35

Horn Metric 100TSR

Specifications UNIT US METRIC
Bending Capacity / Round Tube / Mild Steel IN/MM 4.00 X 0.216 101.6 X 5.5
Bending Capacity / Round Tube / Non-Ferrous IN/MM 4.00 X 0.393 101.6 X 10
Bending Capacity / Round Tube / Stainless IN/MM 4.00 X 0.118 101.6 X 3.0
Bending Capacity / Square Tube / Mild Steel IN/MM 2.75 X 0.216 70 X 5.5
Bending Capacity / Solid Bar / Mild Steel IN/MM 1.96 50

Horn Metric 120TSR

Specifications UNIT US METRIC
Bending Capacity / Round Tube / Mild Steel IN/MM 4.72 X 0.216 120 X 5.5
Bending Capacity / Round Tube / Non-Ferrous IN/MM 4.72 X 0.393 120 X 10
Bending Capacity / Round Tube / Stainless IN/MM 4.72 X 0.118 120 X 3.0
Bending Capacity / Square Tube / Mild Steel IN/MM 3.54 X 0.236 90 X 6.0
Bending Capacity / Solid Bar / Mild Steel IN/MM 2.36 60

Horn Metric 150TSR

Specifications UNIT US METRIC
Bending Capacity / Round Tube / Mild Steel IN/MM 6.00 X 0.275 152.4 X 7.0
Bending Capacity / Round Tube / Non-Ferrous IN/MM 6.00 X 0.512 152.4 X 13.0
Bending Capacity / Round Tube / Stainless IN/MM 6.00 X 0.157 152.4 X 4.0
Bending Capacity / Square Tube / Mild Steel IN/MM 3.50 X 0.275 70 X 7.0
Bending Capacity / Solid Bar / Mild Steel IN/MM 2.750 70

Horn Metric 220TSR

Specifications UNIT US METRIC
Bending Capacity / Round Tube / Mild Steel IN/MM 8.66 X 0.472 220 X 12.0
Bending Capacity / Round Tube / Non-Ferrous IN/MM 8.66 X 0.314 220 X 8.0
Min/Max Bending Radius IN/MM 4.720 / 39.370 120 / 1000
Standard Length Over Mandrel IN/MM 236.22 6000
Max Bending Angle IN/MM 190° 190°
BPLogo-wScreen-220418

BendPro G2v3 Features & Benefits:

  • Most popular CNC bender Control In North America
  • Easy to operate and program
  • Extremely compact
  • 3D simulation
  • Teach Mode with anti­-interference moves
  • Online troubleshooting